Shopped with us before?

Warning: Cancer and reproductive harm-www.P65wamings.ca.gov.,First Aid: For eye contact. Flush with water for 15 minutes, call a physician if irritation develops and persists. For skin contact, wash with soap and water. If affected by inhalation, remove to fresh air and get medical attention. If ingested, do not induce vomiting. Call a physician or Poison Control Center immediately. Do not take internally. Keep out of reach of children.,Warning! Combustible may cause skin & eye irritation. Read back panel carefully for other cautions. Warning! Contains trimethoxysilanes. May be harmful if inhaled or swallowed. Methanol is released during application and cure, which may affect the nervous system causing dizziness, headache or nausea. Keep away from heat, sparks and flame. Use in a well ventilated area. Do not breathe vapors. Avoid contact with eye, skin and clothing. Prolonged or repeated skin contact may cause dermatitis and sensitization. Wash hands after using. Wear gloves when applying product.

Directions: 1. Remove cap by turning counterclockwise. Ensure the bonding surfaces are clean and free from dirt, dust, and other contaminants. For better adhesion slightly sand or smooth glossy surfaces. 2. Apply a thin layer of glue to one surface. Very porous materials will require a thicker layer of adhesive and application to both surfaces. 3. Press parts together. You may reposition for first 5 minutes. Wipe excess adhesive away with mineral spirit. Then tape or clamp for 30 minutes. 4. Final strength after 24 to 48 hours. 5. After use: Replace cap immediately. Keep bottle in a cool, dry place.

Henkel Corporation